Surface
Sampling Products
|
Lead
Wipes
Lead wipes are used for the collection
and sampling of lead in settled dust. Our formulation
does not contain lanolin, aloe, or other interfering
oils which may alter lab test results. The rayon
substrate is easily digested in nitric acid.
Features
- Actual size: 2 1/4”W x 2”H
- Date of Manufacture Lot # stamped
on back
- Meets ASTM E1792-96 requirements
for lead dust sampling wipes
- Listed in the AIHA policy on sampling
materials for lead in surface dust
|
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
AR-LWIPE100 |
Pack of 100 |
0.50 lbs |
|
|
|
|
Centifuge
Tubes
Convenient transport tubes for use with
lead wipe samples.
|
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
SS-3261 |
Case of 500 |
8.00 lbs |
|
|
|
Professional
Lead Test Kit
The LeadAlert chemical spot
test kit utilizes rhodizinate as the indicator for
the presence of lead. Use LeadAlert in the field
for screening/rapid testing. Indicating solutions
give accurate positive/negative results in less than
a minute with sensitivity to 0.5 micrograms. When
lead is present and solubilized by the leaching solution
(a mild, organic acid), a red or pink color will
be seen on the tip of the collection swab or test
card. Each kit comes contains everything needed for
40 qualitative tests, including coring tool and brush.
|
|
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
1050 |
Each |
0.50 lbs |
|
|
|
Instant
Lead Check Testing Kit
Lead Check Swabs are self contained test
units which provide rapid, easy to use, specific
tests for lead on any surface. Simply rub the swab
on any surface. If it turns red, you have lead at
a hazardous level .
|
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
3M-LC8510C |
8 per pack |
0.40 lbs |
|
|
|
LeadCheck
Aqua and LiquidCheck
Still
Waiting to see if 3M is going to make this item
LeadCheck Aqua and LiquidCheck are
used to non-quantitatively detect lead in water and
most liquids.
LeadCheck Aqua II
LeadCheck Aqua II is used to non-quantitatively detect
lead in tap water or well water. It is the only
test that detects lead on site at 15ppb or highter
(the EPA standard) and provides rapid test results
in 10 minutes or less. LeadCheck Aqua II is supplied
as a complete test system and contains all of the
materials required to provide on site analysis
of water samples.
LiquidCheck
Liquid Check is a complete system that is used to non-quantitatively
screen most liquids (such as wastewater) for hazardous
levels of lead. Each kit contains all the required
materials and is available in three different sensitivity
ranges.
|
|
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
HV-4WT5 |
LeadCheck
Aqua II 5 Test Ki |
0.40 lbs |
|
HV-3LC1 |
LiquidCheck
1-4ppm 5 test kit |
0.40 lbs |
|
HV-3LC2 |
LiquidCheck
250-750ppb 5 test kit |
0.40 lbs |
|
|
|
Bio-Tape
Surface Lift System
Bio-Tape™ provides a standardized
sampling method for the determination of mold, microbial,
bioaerosol, and inorganic dust contamination. It
provides the ability to quickly take a sample and
measure the relative degree of contamination. It
is especially useful when sampling valuable or non
transportable materials and is very effective on
smooth areas of concern.
Bio-Tape consists of a flexible plastic microscope
slide with a pre-defined 1" x 1" adhesive area. A center-line
marker on the slide aids the user in locating the center
when taking the sample and also aids the laboratory
analyst in finding the center of the sample. Each slide
is provided with a unique serial number for traceability
and packed in a slide mailer to prevent cross contamination.
Features:
- Provides sample consistency and
uniformity
- Easier to handle than tape
- Individually Serialized for Traceability
- Prevents Cross Contamination
- Eliminates problems of placing
tape in a zip bag, or broken slides during transport
- Requires less laboratory prep
time.
- Ideal for mold sampling and testing
|
|
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
BT0025 |
Bio-Tape
25 pack |
0.50 lbs |
|
BT0050 |
Bio-Tape
50 pack |
0.50 lbs |
|
BT00100 |
Bio-Tape
100pack |
0.50 lbs |
|
|
|
Surface
Swabs
Sterile surface swabs are an easy way
to sample suspect areas for mold contamination. Simply
swab the suspect area and submit to a laboratory
where the sample will be cultured and the type of
mold identified. Each swab comes in an easy to use
container for sampling, transport and storage. Packaged
with 50 swabs in a pack
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
ZA0023 |
50/Case |
1.00 lbs |
|
|
|
|
Mercury
Test Kit
Still
Waiting to see if 3M is going to make this item
MercuryCheck Swabs are
self-contained test units which provide a rapid,
easy to use, specific test for mercury on any surface.
Cross section of MercuryCheck
Swab Showing Patented System
There is a fiber tip at one end. Inside the barrel
is a single glass ampoule which contains the mercury
reactive material. To activate the swab, simply squeeze
to crush the glass ampoule and shake well to mix
the reagents. Gently squeeze Swab and rub test surface.
The tip will turn violet (purple) in the presence
of Mercury.
Sensitivity: |
|
|
1.5
ug on solid surfaces |
|
10 -20 ppm in liquid |
|
|
Stability: |
Indefinite |
|
|
Crossreactants: |
|
|
High levels of Cu++ ion turn Swab
tip reddish-brown |
|
High levels of Cu++ ion turn Swab
tip reddish-brown |
|
|
Interferences: |
None identified |
|
|
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
HV-MTL-HG8 |
Pack of 8 |
1.00 lbs |
|
|
|
Cadmium
Test Kits
So
Far 3M Is Not Making These
Kits.
CadmiumCheck Swabs are
self-contained test units which provide a rapid,
easy to use, specific test for cadmium on any surface.
Cross section of CadmiumCheck Swab Showing Patented
System
There is a fiber tip at one end. Inside the barrel
are two glass ampoules which contain the cadmium reactive
materials. To activate the swab, simply squeeze under "A" and "B" to
crush the glass ampoules and shake well to mix the
reagents. Gently squeeze Swab and rub test surface.
The tip will turn peach in the presence of Cadmium.
|
|
Sensitivity: |
|
|
1
ug on solid surfaces |
|
2 ppm in liquid |
|
|
Stability: |
Indefinite |
|
|
Crossreactants: |
|
|
High levels of Nickle (>10ug) turn
Swab tip peach |
|
High levels of Mercury turn Swab tip
orange |
|
High levels of Silver turn
Swab tip orange |
|
|
Interferences: |
High levels of Chromium
(Cr+3) turn Swab tip peach. |
|
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
HV-MTL-5CD8 |
Pack of 8 |
1.00 lbs |
|
|
|
Chromate
Test Kits
ChromateCheck Swabs are
self-contained test units which provide a rapid,
easy to use, specific test for chromate on any surface.
Cross section of ChromateCheck Swab Showing Patented
System
There is a fiber tip at one end. Inside the barrel
are two glass ampoules which contain the chromate reactive
materials. To activate the swab, simply squeeze under "A" and "B" to
crush the glass ampoules and shake well to mix the
reagents. Gently squeeze Swab and rub test surface.
The tip will turn pink or purple in the presence of
Chromate. |
|
Sensitivity: |
|
|
1
ug on solid surfaces |
|
2 ppm in liquid |
|
|
Stability: |
Indefinite |
|
|
Crossreactants: |
None identified |
|
|
Interferences: |
None
identified |
|
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
3M-CCBS |
Pack of 8 |
1.00 lbs |
|
|
|
Nickel
Test Kits
Still
Waiting to see if 3M is going to make this item
NickelCheck Swabs are
self-contained test units which provide a rapid,
easy to use, specific test for nickel on any surface.
Cross section of NickelCheck Swab Showing Patented
System
There is a fiber tip at one end. Inside the barrel
is a single glass ampoule which contains the nickel
reactive material. To activate the swab, simply squeeze
to crush the glass ampoule and shake well to mix the
reagents. Gently squeeze Swab and rub test surface.
The tip will turn pink in the presence of Nickel. |
|
Sensitivity: |
|
|
1
ug on solid surfaces |
|
10 ppm in liquid |
|
|
Stability: |
Indefinite |
|
|
Crossreactants: |
|
|
High levels of Colbalt (Co2+) turn Swab
tip brown |
|
High levels of Iron (Fe2+3+) turn Swab
tip green |
|
|
Interferences: |
None identified |
|
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
HV-MTL-6NI8 |
Pack of 8 |
1.00 lbs |
|
|
|
Asbestos
Bulk Sampling Kits
The safest, most efficient
way to collect bulk asbestos samples.
Features:
- Eliminates cross-contamination
- Easy to operate
- Ends the need for protective
equipment during sampling
- Encourages full-depth samples
- Complies with OSHA asbestos
regulations
Specifications:
- Includes rugged carrying case
with fold-down handle and postive grip latch,
two handles, two plungers, and 100 cutter sleeves
in clear slim vials with caps
- Dimensions: 13" L x 11" W x
14" H
- Materials: Plastic case, aluminum
handles, aluminum cutter sleeves, clear plastic
slim vials, and vinyl press fit caps
- Weight: 8 lbs.
- Finish: Silver cutter sleeves,
brushed aluminum handles and plungers, red
vial caps, case color varies
- Miscellaneous: Optional items
available: double-length cutters, power driver,
coring arm, Wonder Fill repair insulation,
and plunger adapter
|
|
The
bulk asbestos kit is available in the following configurations:
WM10 - Starter Set with Case (100 Regular Length Cutter
Sleeves in Vials, 2 Handles, 2 Plungers, 1 Carrying Case)
WM11 - Double-length Set with Case (100 Double-length Cutter
Sleeves in Slim Vials, 2 Handles, 2 Double-length Plungers, 1 Carrying
Case) |
PRODUCT # |
PACKAGING |
SHIPPING Weight |
|
WM10 |
Bulk
Starter Set |
10 lbs |
|
WM11 |
Double
Length Bulk Starter Set |
10 lbs |
|
|
|
|
|
|
|